Preparation before use:
1) Be careful not to scratch the inflatable packaging film when unpacking the air column bag box ;
2) The working environment is required to be clean, no outer box with nails, no illegal operations such as dragging and grinding gas sheets on the ground, and no sharp objects may be stabbed during use;
3) Place the inflatable air bag packaging on a smooth surface to prevent the air bag from being scratched and leaking due to contact with sharp objects;
4) If you use an electric air pump to inflate, please use a 2bar pressure regulating pump valve to ensure that the valve table is accurate and normal, and adjust the air pressure (within 0.8bar) according to the inflation parameters to prevent the air valve from breaking due to excessive pressure;
5) Please use a suitable inflatable air nozzle (the air nozzle is about 2cm long and the aperture is 0.5cm-1cm), so as to avoid the necessary to move the air nozzles to inflate one by one when inflating with a slender air nozzle, and the effect will be uniform.
6) If the packaged item has edges and corners, it is better to polish the edges and corners to be smooth. If it cannot be polished, it is recommended to add carton packaging to the air column packaging to ensure that the packaged items are well protected.
Notice during use:
1) Open the inflatable channel (you can use the air nozzle to blow the entire airway together first), and then stab the air nozzle into the air inlet ;
2) When starting to inflate, pinch the air inlet and air nozzle appropriately to prevent air leakage as much as possible, and of course, pay attention to properly loosening when the inflation is nearing the end to prevent overcharging;
3) If there is no air intake in the individual air column during the inflation process, it is because the air stop valve has not been flushed, and this problem can be solved only by gently pressing the air stop valve of the air column;
4) How much the inflation process consumes depends on the amount of air column, the size of the air bag, the inflation pressure, and the need to prevent overfilling;
1) If there is a problem during the inflation process, please contact customer service in time.
Therefore, in order to start from a safe point of view, the user needs to be very careful when using the air column bag, and it is necessary to restrict the use of similar sharp objects to use the buffer air column bag. After the water chestnut is processed, it can be used again.
Whatsapp:Air Box Packaging
Add: No.6-2 Shengyi road, Yuhang street, Yuhang district , Hangzhou ,Zhejiang